KNODOS Echo 58mm Espresso Tamper for Gaggia, Lelit & Rocket – Calibrated 30lb Click, 58.3mm Self-Leveling Oak

The KNODOS Echo is a calibrated, spring-loaded 58mm espresso tamper with audible click feedback and a bold-grain oak handle, built for standard 58mm group-head machines. Press until it clicks, lift, and pull your shot — the same firm, even tamp every time, with no force gauge and no guesswork. A 58.3mm precision-machined stainless base, a dual spring system (30lb fitted + 20lb spare), and a solid oak grip.

One Calibrated Pressure

A 30lb calibrated spring sets the force and clicks the instant you reach it, so every tamp from this self leveling tamper 58mm lands identical — no gauge to read, no over-tamping, and no long learning curve.

Made for 58mm Group-Head Machines

Sized for Gaggia Classic and Classic Pro, Lelit MaraX, Rocket Appartamento, Profitec Pro 600, ECM and E61 group heads, this 58mm tamper drops in flush — its 58.3mm stainless base fills the basket edge to edge, so coffee packs level instead of domed. The flat, balanced face settles square on the basket on its own, packing the bed uniformly to cut channeling and lift the crema higher.

Two Springs, Your Pressure

The 30lb spring comes fitted and a 20lb spare rides in the box for lighter or more delicate roasts. The change is hand-tight in under a minute — no driver, no fuss — and the click stays crisp at both settings.

Bold-Grain Oak Handle

A solid oak grip — hand-finished, hard and durable, with a bold open grain that glows pale-to-golden brown — pairs with a polished stainless base. Warm to hold and striking on the counter, and no two pieces are quite alike.

Machine Compatibility

This 58mm espresso tamper fits standard 58mm portafilters, including:

• Standard 58mm: Gaggia Classic Pro, Lelit MaraX, Rocket Appartamento, Profitec Pro 600, ECM, E61 group heads
• And other 58mm group heads

What's Included

• 1x KNODOS Oak Echo Tamper (58mm)
• 1x 30lb Spring (pre-installed)
• 1x 20lb Replacement Spring