



Echo Tamper · Tampers
KNODOS Echo Flat-Base Tamper 58.5mm for VST & IMS Baskets – Calibrated 30lb Click, Auto-Leveling Oak
$49.99
The KNODOS Echo is a calibrated, spring-loaded 58.5mm espresso tamper with audible click feedback and a bold-grain oak handle, machined for VST and IMS precision baskets. Press until it clicks, lift, and pull your shot — the same firm, even tamp every time, with no force gauge and no guesswork. A precision flat stainless base, a dual spring system (30lb fitted + 20lb spare), and a solid oak grip.
Made for 58.5mm Precision Baskets
This 58.5mm tamper drops into VST baskets, IMS Competition baskets and specialty OEM 58.5mm portafilter baskets. It is not for standard 58mm OEM baskets, where it seats too tight — for those, choose the 58mm Echo with its 58.3mm base.
One Click, One Pressure
A 30lb calibrated spring sets the force and clicks the instant you reach it, so every tamp from this calibrated tamper 58.5mm lands identical — no gauge to read, no over-tamping, and no long learning curve.
Auto-Levels Itself
The precision-machined stainless face is dead flat and balanced, so it auto-levels against the basket on its own instead of tilting with your wrist. The puck packs evenly, water cannot channel, and the crema pours thicker.
Two Springs, Your Pressure
The 30lb spring comes fitted and a 20lb spare rides in the box for lighter or more delicate roasts. The change is hand-tight in under a minute — no driver, no fuss — and the click stays crisp at both settings.
Bold-Grain Oak Handle
A solid oak grip — hand-finished, hard and durable, with a bold open grain that glows pale-to-golden brown — pairs with a polished stainless base. Warm to hold and striking on the counter, and no two pieces are quite alike.
Basket Compatibility
This 58.5mm espresso tamper is sized for precision baskets, including:
- Precision baskets: VST, IMS Competition, specialty OEM 58.5mm
- Not for standard 58mm OEM baskets — use the 58mm Echo instead
What's Included
- 1x KNODOS Oak Echo Tamper (58.5mm)
- 1x 30lb Spring (pre-installed)
- 1x 20lb Replacement Spring
| Base | 58.5mm (Precision Basket Fit) |
| Base Material | Stainless Steel, Polished |
| Handle | Solid Oak |
| Calibrated Force | 30 lb fitted + 20 lb spare |
| Mechanism | Click Feedback, Auto-Leveling |
| In the Box | Tamper, 30 lb spring, 20 lb spring |
| Compatible Models | VST, IMS Competition, OEM 58.5mm baskets (not standard 58mm) |
